Posts Tagged ‘Energy Savings’

New Technology: Improve Energy Efficiency and Make Your Newark Home More Comfortable

Wednesday, March 7th, 2012

York has several innovative products that can make your Newark home more comfortable and help you save energy. Zone control systems help you keep each section of your house the correct temperature, and they also help you use less energy because some parts of your house need less heating than others. York also offers variable speed fans, which instead of turning on and off, run constantly to give you more even heating and better indoor air quality. Our multi-stage heating systems vary their output according to demand, so your home will maintain a comfortable temperature without wasting fuel. For more information about York’s energy saving products, take a look at this video:

 

York Products and Sustainability

Friday, February 24th, 2012

Some of the best ways to make your home more environmentally friendly involve your heating and air conditioning equipment. Did you know that residential and commercial buildings account for 40 percent of the energy used today? One of York’s missions is to help homeowners reduce their carbon footprint, and we have produced many products that can help you make your home more environmentally friendly.

All of our air conditioners and heat pumps use R-410A refrigerant, which has been shown to have zero impact on ozone depletion. We also offer gas furnace with a fuel efficiency of up to 98 percent, so you can use as little fuel as possible to keep your home comfortable.  All of our high efficiency equipment, from heat pumps to air conditioners, is offered at an affordable price. You can upgrade your system without it costing an arm and a leg, making it easier than ever to go green.

We also make many smaller, compact products, which use fewer natural resources to produce. And since York products are designed to be durable, they will last a long time before needing to be replaced.

If you are thinking about making your home more green this year, give one of our York dealers a call! They will tell you more about our innovative, environmentally friendly systems and how they will make your home more comfortable and help you save money on your utility bills!

 

Monroeville HVAC Tip: How Your York System Can Save You Money

Friday, February 17th, 2012

When thinking of ways to save energy in your Monroeville home, changing out your incandescent light bulbs for fluorescents and adding insulation were probably the first things you thought of. But did you know that your heating and air conditioning system can account for more than 40 percent of your utility bill? An upgrade to your HVAC equipment can have a huge impact on your energy use, no matter where you live or the power source you use. York heating and cooling systems have some of the best energy efficiency ratings in the business, and we are constantly innovating to give you the best performing equipment possible. Here is a video that explains the ways that our high efficiency systems can save you money!

If you have any questions about having a York system installed in your home, give your local Monroeville York dealer a call today!

Perth Amboy Heating Tip: Most Energy Efficient Upgrades for Your Home

Friday, February 3rd, 2012

Before you decide which upgrades will make your Perth Amboy home more efficient, it would be best to get a home energy audit. You can do this yourself with a few simple tests, or you can hire a professional auditor. The auditor will use advanced equipment and techniques, such as blower doors and infrared cameras, to detect air leaks and places that need more insulation.

When your home is properly insulated and sealed, here are some upgrades you’ll want to think about to make your home more efficient.

High-Efficiency Furnaces & Heat Pumps

If you have an old single-stage York furnace, it is time to upgrade. These furnaces were designed to run on two settings—either off or on, and when they are on, they run at full speed. Not only do they lose heat this way, but they also take longer to warm up your home. The new two-speed and multispeed models run at lower speeds to maintain a constant temperature. You can also buy ones with variable-speed blowers that operate on various speeds, which are the most efficient. York heat pumps are a good option if you need both heat and A/C in your home. While most heat pumps are manufactured to be efficient by design, the newer models are the most efficient way to heat and cool your home. If you have a heat pump older than 15 years, talk to an HVAC technician about a heat pump replacement.

Solar & Tankless Water Heaters

When you’ve upgraded your heating system, it may be time to install a more efficient water heater. Solar water heaters are gaining popularity, and they are the most efficient way to save hot water if certain factors are in place, such as sunlight exposure and high fuel costs.  Tankless water heaters heat your water with individual units located near hot water applications. You also have the option of installing a single, whole-home tankless water heater, or for appliances that use more hot water, such as dishwashers and washing machines, you can install tankless models just for their use.

Water-Saving Toilets & Low-flow Plumbing Fixtures

Duel flush, or water-saving toilets are an excellent choice for an upgrade if you want to save water. These toilets use less water overall, and you have the option of using more or less water each time you flush. Installing low flow faucets and fixtures can also provide up to 60% in utility savings. Low flow plumbing fixtures reduce the flow rate for each fixture or application, which reduces the overall amount water used in the home. These are a good option if you’ve installed a tankless water heating system. Your tankless water heaters will be more efficient if the sum of the flow rate total for every fixture in the home is lower.

Don’t hesitate to call a local New Jersey York dealer if you have any questions about upgrading your Perth Amboy home.

York Tip of the Week: Energy Saving Calculator

Wednesday, January 25th, 2012

If you are thinking about replacing your heating or air conditioning equipment, there are a lot of factors to consider. Some of the most important of these are what fuel you want to use, the size of the new unit, and whether or not you want the same system for heating and air conditioning.  While you can do a lot research on the internet, and you can always call your local contractor, there are some great tools out there to help you make the right decision for your home.

The York Energy Savings Calculator is an online tool that helps you understand some of the factors that go into buying HVAC equipment. You simply need to enter in your home’s square footage and any information you know about a system, and this tool will tell you the yearly operating cost! It is an easy way to compare different systems (a high efficiency versus a medium efficiency furnace, for example) and to understand exactly how much you can save on your bills each month by upgrading. It will also estimate the increased value of your home with the new equipment! While we still recommend you consult with a professional before making a final decision, this tool is a great starting point.

To try out this tool, simply follow this link: http://www.yorkopcost.com/

And if you want to have a new heating or air conditioning system installed in your home, contact your local New Jersey York Dealer.

How to Calibrate Your Thermostat: A Guide from Fort Lee

Friday, November 11th, 2011

Have you ever set the thermostat in your Fort Lee home to a desired temperature and “hoped for the best?” Maybe it’s because the temperature setting you expected this finely tuned instrument to maintain just isn’t right. You may see 70 degrees on the thermostat but the home feels more like 65 degrees. In fact, if you used a hand-held thermostat, you might get real proof that your York thermostat is not working like it should.

There are reasons for a malfunctioning thermostat and solutions to correct them, namely calibration. First, let’s look at some reasons why a thermostat can be out of kilter.

The first thing to note is that York thermostats are very sensitive instruments and change to the slightest changes in temperature. An incorrectly installed thermostat or one that is accidentally bumped or jarred can malfunction. It may wind up out of level, causing it to operate incorrectly. Possibly the most common problem affecting accuracy is a build-up of dirt, which can affect the calibration of the thermostat. Other problems may be caused by loose wiring.

Here are some steps you can take to check your thermostat for accuracy and recommended actions.

  1. Use a standard glass thermometer to check the room temperature. You should mount it on the wall nearby your thermostat and use some padding to keep it from actually coming in contact with the wall, which could affect the readings.
  2. Wait 15-30 minutes for the thermometer to adjust to the temperature and enable it to give the most accurate reading. Once the time has elapsed, compare its temperature reading to that on your thermostat.
  3. If there is more than a one degree variation, your thermostat may be dirty. Remove its faceplate and examine it. If there is dirt or dust inside, blow it out. If you can reach the contact points, you can clean them with a new dollar bill (and speaking of dollars, a clean and accurate thermostat will make your furnace run more efficiently and save you money on your utility bill).
  4. Some thermostats use a mercury vial which can indicate if the thermostat is level or not. If it is not level, a simple adjustment using a screwdriver may do the trick. In the worst case, you may have to remove the thermostat and drill a new hole to reinstall the mounting screw in a different location.
  5. Now that you have made these corrections, check both thermostats to see if the temperatures match. If they don’t, try steps 3 and 4 again. If that still doesn’t work, your problem may be more than just a dirty, lopsided thermostat. You may need to replace the thermostat – or even look at the heating system in its entirety. It could be time to call a York heating contractor to check out your entire system.

Today’s York thermostats have few working components but are very sensitive, advanced instruments. It takes little to throw off a thermostat but luckily, it takes little effort to correct the resulting problems.

Taxes and Energy Savings in New Jersey

Monday, September 5th, 2011

Being energy efficient isn’t just good for the environment; it is good for your wallet too! Not only do you save money by lowering your energy bills each month but you are also able to get some tax credits. While some of these credits have changed since 2010, there are still plenty of ways that you can save money by improving the energy efficiency of your New Jersey home.  Taxes are confusing, but this is one tax credit that is easy to understand without your accountant. We found this great guide on Bizactions.com that explains exactly what you can do to improve your home and claim these tax credits.

The federal government offers two different tax credits for energy-saving home improvements. The rules for one credit changed for the worse since last year. The other credit remains as generous as ever. Here’s what you need to know if you want to claim these credits this year.

1. Modest Credit
for Garden Variety
Energy-Saving Improvements
2. Bigger Credit
for More Expensive
Energy-Saving Equipment
The first credit equals 10 percent of certain qualified home improvement expenditures plus 100 percent of certain other expenditures–subject to a rather stingy overall credit cap of $500. And you must reduce that already-skimpy cap by credits claimed in earlier years. While the $500 cap is uninspiring, the good news is the credit covers a broad range of energy-saving expenditures for your principal U.S. residence, and there are no income limits. However improvements made to vacation homes and foreign residences are not eligible.

You may remember that the 2010 version of this credit was much more generous. It equaled 30 percent of qualified expenditures — subject to a $1,500 cap. The current version with the $500 cap is scheduled to expire at year end. Because it is doubtful that the credit will be extended, you may need to take action this year to benefit.

Here are more details on the $500 credit.

Claiming the Credit for Improvement Costs

For the following home improvements, the maximum credit equals 10 percent of qualified 2011 expenditures up to the $500 limit (reduced by any credit claimed in earlier years).

  • Exterior windows including skylights and storm windows, subject to a $200 credit cap.
  • Exterior doors including storm doors.
  • Insulation.
  • Metal and asphalt roofs with heat-reduction components.

For these items, you cannot count costs for site preparation, assembly, or installation.

Claiming the Credit for Equipment Costs

For the following items, the maximum credit equals 100 percent of qualified 2011 expenditures up to the $500 limit (reduced by any credit claimed in earlier years).

  • High-efficiency central air conditioners; electric heat pumps, electric heat pump water heaters; water heaters that run on natural gas, propane or oil; and biomass fuel stoves used for heating or hot water. The cap for these items is $300.
  • Furnaces and hot water boilers that run on natural gas, propane, or oil–subject to a cap of $150.
  • Advanced main air circulating fans used in natural gas, propane, and oil furnaces–subject to a cap of $50.

For these items, costs for site preparation, assembly, and installation are eligible for the credit.

Manufacturer’s Certification Is Required

You must obtain a manufacturer’s certification that the product in question qualifies for the $500 credit. The certification may be on the product packaging, or you may be able to print it out from the manufacturer’s website. In any case, keep the certification with your tax records. You won’t need to attach the certification to your Form 1040, but Form 5695 (Residential Energy Credits) will be included with your return.

The second credit equals 30 percent of qualified expenditures to buy and install more-exotic (and expensive) energy-saving equipment for your home. Because the expenditures for these items can be big, the credit amounts can be big too. And there are no income limits. Even billionaires can take advantage.

This second credit is available through 2016, so there is no big hurry. If your 2011 credit is so large that you cannot use it all up on this year’s return, you can carry the excess forward to 2012 and beyond.

Qualified Expenditures

The credit equals 30 percent of qualified expenditures including costs for site preparation, assembly, installation, piping, and wiring for the following gear.

  • Solar water heating equipment for your U.S. residence (including a vacation home).
  • Solar electricity generating equipment for your U.S. residence (including a vacation home).
  • Wind energy equipment for your U.S. residence (including a vacation home).
  • Geothermal heat pump equipment for your U.S. residence (including a vacation home).
  • Fuel cell electricity generating equipment for your U.S. principal residence. Vacation homes don’t count here. For this part of the credit, the maximum annual credit amount is limited to $500 for each .5 kilowatt hour of fuel cell capacity that you add during that year.

Special Rules

You cannot claim the credit for equipment used to heat a swimming pool or hot tub, and special rules apply to expenditures for residential co-op and condominium buildings.

You Must Get a Manufacturer’s Certification

Again, you are required to obtain a manufacturer’s certification stating that the equipment in question qualifies for the credit. You don’t need to attach it to your Form 1040, but keep it with your tax records. A completed Form 5695 will be included with your return.

Finally, keep proof of exactly much you spend — including any extra amounts for site preparation, assembly, installation, piping, or wiring.

Check for Additional Cash Inducements

You might also be eligible for state and local income tax benefits, subsidized state and local financing deals, and utility company rebates. These additional inducements can amount to hundreds of dollars or more.