Posts Tagged ‘Furnace Repair’

Paterson Heating Repair Question: What Are Flue Gas Spill Switches?

Friday, February 10th, 2012

While some components of a York heating system make sense to the average Paterson homeowner – think blower fan, thermostat and air ducts – others are more esoteric and prone to bouts of head scratching.

So, you may find yourself asking “what the heck is a flue gas spill switch?”

As you know, gas heating appliances produce heat by means of combustion. The gas line feeds gas into the appliance, the gas is ignited, and the burning gas produces heat. It’s a simple concept that goes all the way back to our caveman ancestors building fires to keep warm, and it is the same process in gas furnaces, boilers and water heaters.

In addition to producing the cozy heat we love in the winter time, this combustion process also releases gases. Known collectively as “flue gases,” some of these – carbon monoxide being the most notorious – can be very toxic. This why we have flues or chimneys in our homes– to give these gases a means of egress.

A flue gas spill switch is designed to shut down the furnace if these gases start seeping out. It is made up of a sensor or series of sensors that detect heat outside the flue, not unlike the flame sensor in your York furnace. If flue gases start to escape and pass by the sensor, the sensor heats up and signals the furnace to shut down. This cuts off the power and gas, so that no more flue gases can leak into the home and create a health concern.

If your furnace has been abruptly shutting down, it could be your flue gas spill switch trying to tell you that you have a leaky or cracked flue. If this is the case, you want to have it repaired right away. The constant off and on is not good for the furnace, and more importantly, those flue gases can be exceptionally hazardous to your family’s health. Be sure to call your New Jersey York dealer if you us suspect that you have a problem with your furnace.

Tags: , , , , ,
Posted in Heating | Comments Off

Jersey City Heating Repair Guide: Is Your Furnace Not Blowing Enough Air?

Monday, January 30th, 2012

Have you ever been in your Jersey City house in the winter, listening to your York furnace churn away trying to heat the house, but noticed that the whole place is still cold? If you checked the heating vents in this situation, you would probably find that there is not much air flow coming out of them, which is why you are still freezing.

It is entirely possible for the furnace to be burning away, producing hot air, without enough of that warm air ever actually being distributed through your home. So it continues to run and run, resulting in excess wear and tear on  your York heating system that will probably shorten its productive life, as well as keeping your whole home too chilly.

Why does that happen? There are a several common culprits for insufficient air flow from a furnace. Below is a list of the most frequent offenders, along with solutions for each:

  • Cause: Dirty or broken air filter. An air filter that has accumulated too much build up or is damaged will slow down air flow in a hurry.
    Solution: Clean or replace the air filter as necessary. This should be part of routine furnace maintenance in order to ensure efficient operation. Refer to the manufacturer’s recommendations to see how often you should check your air filter(s).
  • Cause: Damaged, corroded, broken or collapsed ductwork. Your ducts are like the road that warm air travels on. If the road is out, then no one can get through. Simple as that.
    Solution: Have a professional inspect and repair your ductwork. A routine ductwork check is also part of a professional’s annual maintenance inspection.
  • Cause: Blower fan not blowing enough. This can be caused by a loose fan belt, or a dirty motor.
    Solution: First, clean the blower fan and the area around it. It has to deal with a lot of air, so it naturally becomes dirty over time. If that doesn’t fix it, the fan belt probably needs to be replaced.

There are some other causes of improper furnace air flow, but those are the most common and easiest to detect and repair. If your heat registers are not returning any warm air at all, that is likely a different problem and you should call a New Jersey York dealer to look at the system right away.

Tags: , , , , , ,
Posted in Heating | Comments Off

Kearny Heating Repair Guide: Troubleshooting Furnace Air Flow Problems

Monday, January 9th, 2012

Whenever you notice furnace air flow problems in your Kearny home, you can usually do a little troubleshooting and solve the issue on your own. Most air flow problems can be fixed easily and quickly. Here are a few guidelines to get you started, but if you need help or notice other problems with your furnace, call a qualified York heating technician.

Furnace Filters:

Checking the furnace filter is the first step you should take when there are any issues with your furnace, but especially with air flow problems. If a filter is dirty enough, the furnace will not come on at all. Ultimately, a clogged or dirty filter restricts the air flow, and this is the source of air flow problems ninety percent of the time.

Supply Registars and Cold Air Returns:

Once you’ve replaced or cleaned the filter, check your cold air returns, which are the vents that draw in the cold air in forced air systems. When a cold air return is blocked  by furniture or other obstructions, they cannot draw in enough air to allow the furnace to put out an adequate amount of hot air. Make sure they are open if nothing is blocking them.

Next, check your supply registers, which are the vents that supply the warm air, and make sure they are open as well. Whenever your heat is on, all of your supply registers should be open. Closing some vents will not increase the air flow in other vents in the house. Closing off one or two in areas where heat is not always needed will not hurt your system; however, when you close too many supply registers, it can cause problems with the ductwork and eventually damage the furnace if the air pressure is not correct.

Clean Your Vents:

You should have a qualified York HVAC technician professionally clean your ducts and vents at least once a year, which is another reason it’s important to schedule annual maintenance visits. A professional cleaning is typically part of the yearly heating system inspection. You can help by vacuuming your vents regularly, particularly during the months the heating system is not in use, or at least before you turn it on in the fall. Simply cleaning your vents can help air flow and extend the life of your entire heating system.

If you continue to experience air flow problems, call a certified York heating technician. There could be a more serious issue, or if you have a newer furnace, your original ductwork could be the wrong size for that furnace model.

Tags: , , , , , ,
Posted in Heating | Comments Off

Common Furnace Problems: A Guide from Hillside

Monday, November 14th, 2011

When it comes to your Hillside home’s York furnace, you simply want it to work all of the time. But just like any other piece of equipment, your furnace will have problems from time to time. A few of these are relatively simple to fix on your own, but for the most part you’ll need to call in someone to take care of the repairs for you.

However, before you can do that, you’ll need to recognize that a problem exists at all. And the earlier you notice the warning signs, the better off you’ll be. It’s always better to get a furnace problem taken care of right away than to wait until your York furnace stops working completely.

It’s also good to remember that quite often the problems you’re having with your furnace are really originating with your thermostat. This is usually welcome news, as thermostats are much cheaper and easier to repair and replace than many other parts of your furnace. In fact, even if your York furnace isn’t working at all, it may only be the result of a faulty thermostat.

Another problem you may start to notice is that one part of your house is being warmed more than another part. When this happens, it can be a sign that there is something wrong with the furnace, but it may also be that the pressure in your duct system is not balanced properly. A simple rebalancing of this system can have your house heating evenly again in no time.

You may also realize that your furnace seems to be cycling on and off too often. When a furnace is working properly, it will come on for a considerable period of time and then shut off until the temperature in the house drops below the desired level. However, some problems can cause your furnace to complete many short cycles rather than fewer short ones.

If this is happening to your furnace, there are several possible causes. Something might be wrong with the blower on the furnace or the thermostat might not be feeding the furnace the correct information. Another possibility is that your furnace’s air filter is dirty or clogged.

While there are sometimes simple and straightforward solutions to these types of common furnace problems, it’s best to call in a York professional to have them take a look if you’re not sure where to start searching for a problem. In most cases you’ll need them to come out and make the necessary repairs anyway.

Tags: , , , , , , ,
Posted in Heating | Comments Off