Posts Tagged ‘Hunterdon County’

Kearny Heating Repair Guide: Troubleshooting Furnace Air Flow Problems

Monday, January 9th, 2012

Whenever you notice furnace air flow problems in your Kearny home, you can usually do a little troubleshooting and solve the issue on your own. Most air flow problems can be fixed easily and quickly. Here are a few guidelines to get you started, but if you need help or notice other problems with your furnace, call a qualified York heating technician.

Furnace Filters:

Checking the furnace filter is the first step you should take when there are any issues with your furnace, but especially with air flow problems. If a filter is dirty enough, the furnace will not come on at all. Ultimately, a clogged or dirty filter restricts the air flow, and this is the source of air flow problems ninety percent of the time.

Supply Registars and Cold Air Returns:

Once you’ve replaced or cleaned the filter, check your cold air returns, which are the vents that draw in the cold air in forced air systems. When a cold air return is blocked  by furniture or other obstructions, they cannot draw in enough air to allow the furnace to put out an adequate amount of hot air. Make sure they are open if nothing is blocking them.

Next, check your supply registers, which are the vents that supply the warm air, and make sure they are open as well. Whenever your heat is on, all of your supply registers should be open. Closing some vents will not increase the air flow in other vents in the house. Closing off one or two in areas where heat is not always needed will not hurt your system; however, when you close too many supply registers, it can cause problems with the ductwork and eventually damage the furnace if the air pressure is not correct.

Clean Your Vents:

You should have a qualified York HVAC technician professionally clean your ducts and vents at least once a year, which is another reason it’s important to schedule annual maintenance visits. A professional cleaning is typically part of the yearly heating system inspection. You can help by vacuuming your vents regularly, particularly during the months the heating system is not in use, or at least before you turn it on in the fall. Simply cleaning your vents can help air flow and extend the life of your entire heating system.

If you continue to experience air flow problems, call a certified York heating technician. There could be a more serious issue, or if you have a newer furnace, your original ductwork could be the wrong size for that furnace model.

Tags: , , , , , ,
Posted in Heating | Comments Off

Bernardsville Dealer Guide: What to Expect in a Low, Medium or High Efficiency Furnace

Monday, December 12th, 2011

When buying a new York furnace in Bernardsville, you have many options. You can purchase a low end model to save money up front and you’ll still get exceptional fuel efficiency, but as you go up the scale, more innovative, money saving features become available. Here is a brief look at what you can expect based on which type of furnace you purchase.

Low Efficiency Furnace

This is a bit of a misnomer as even entry level furnaces have efficiency ratings of at least 80%. For comparison, if you’re still using an old gravity furnace, your efficiency rating could be lower than 50%. Modern furnaces are built to conserve, and while you won’t receive all of the bells and whistles that tend to accompany high efficiency models, you will get a durable, affordable furnace that will last for 10-20 years.

Medium Efficiency Furnaces

Furnaces in the mid-efficiency range have AFUE ratings of between 85% and 92% and are therefore significantly better than those in the entry level range. They also have some of the higher end features available in high efficiency models like programmability and the option for zone control. Because they are still mid-range, they are affordable without skimping too much on features too – a must for any homeowner wanting to save money on both ends.

High Efficiency Furnaces

The highest efficiency furnaces on the market are very different from those you would have purchased even just 10 years ago. Top end York furnaces can carry AFUE ratings of up to 95% with a boat load of added features to conserve energy. These features include two stage gas valves so you can maintain a low BTU heating system for most of the year but crank up the heat when the temperature outside drops too low. They are also programmable, which allows you to easily change the temperature settings, fan speed and more from anywhere in the house.

And while they cost more to install, high efficiency York furnaces use less energy over their lifespan, last longer and are more environmentally friendly than any other furnaces on the market today.

Tags: , , , , , ,
Posted in Heating | Comments Off

Indoor Air Quality Options in Piscataway

Monday, November 28th, 2011

Maintaining high indoor air quality is always worth investing time and money in. After all, if the air inside your Piscataway home isn’t healthy, it can cause all kinds of health problems for you and your family. The state of the art York home heating and cooling systems we have today make it possible to enjoy a perfectly temperature controlled indoor environment all year long, but they also trap indoor air pollutants and contaminants inside without proper ventilation.

Choosing a System that Works

Luckily there are a number of great products out there designed to remove these pollutants before they cause you and your family discomfort or illness. Before you run out to buy a new system, however, you should first consider what each has to offer and what pollutants you need to remove. You might have some idea about this already, but the best thing to do is talk to a professional who can help assess your indoor air and determine which types of contaminants are most prevalent in your home.

Different types of York indoor air cleaners are better at targeting different types of contaminants. For instance, HEPA filters can remove up to 99.97% of particulate contaminants that measure 0.3 microns or larger. This includes things like pollen, pet dander, dust mites and mold spores, so if these are the things you want to target, an indoor air system that uses HEPA filters is probably right for you.

However, if you’re more concerned with getting rid of smoke odors and cooking fumes, you probably want a system that targets even smaller particles. Air ionizers are more appropriate for these types of indoor air quality issues, as they can effectively remove much smaller particles than most HEPA filters. On the flip side, ionizers aren’t as efficient at removing the larger contaminant particles, so if you want to target both small and large contaminants, you need a system that combines both of these technologies.

Bacteria and viruses are also a problem when they find their way into your indoor air and they can be particularly tricky to get rid of. HEPA filters and air ionizers both have trouble completely eradicating these pathogens, but UV germicidal lights can be incorporated into your York indoor air cleaning system to tackle biological contaminants effectively.

No matter what type of home air quality problem you have, there is a system on the market that will target and remove the pollutant. The key is to know which pollutants effect you the most and which products will do the best job of removing them from your home.

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off

What is Air Purification? A Question from Iselin

Monday, November 7th, 2011

The air around us is getting more and more polluted these days in New Jersey, and people are trying to do more and more to combat it. Cars come with ratings like “ultra-low emission vehicle” and windmills generate power from moving air rather than burning coal. No doubt, these efforts help, but if you want to take an active role in improving the quality of air in your own home, consider an air purification system.

Simply put, air purification is the process of removing contaminants and pollutants from the air. There are a number of  York devices on the market that can purify the air in your home. While anyone can enjoy the benefits of cleaner air, they are of particular utility for people which suffer from asthma or allergies, or who live in areas with higher concentrations of outdoor air pollution.

There are three main kinds of air purifiers, categorized by the kind of technology they use:

  1. HEPA filtration
  2. Negative ion generation
  3. Electrostatic precipitation

York HEPA filtration purifiers simply filter the air that passes through them using a sieve-like filter or series of filters. Depending on the efficiency of the device and the filter, some of these purifiers can trap not only solid and like particles, but also gases and odors. One advantage of this type of purifier is that the HEPA filters can last for years before they need to be changed.

Negative ion generation and electrostatic precipitation models are more complicated and technical because of the technology they use. Consult with a York professional to choose which kind of technology is best for your needs, depending on the air quality problem you are experiencing. Some air purifiers can trap bacteria, viruses, fungi or chemicals, so there is bound to be one that will suit your needs.

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off

How Indoor Air Quality Controls Can Help People with Asthma: A Guide from Fair Lawn

Friday, November 4th, 2011

If you, your child or anyone else in your family suffers from asthma, you know that it can be brutal. The shortness of breath, the wheezing, and the chest tightness—it’s not just uncomfortable; it can be downright scary.

There is evidence to suggest that higher quality air can help keep asthma symptoms in check. While you can’t control air quality everywhere you go, you can be in charge of the quality of the air in your Fair Lawn home. Take a look at how controlling indoor air quality can help ease the suffering of asthma symptoms.

One study at Johns Hopkins found that indoor air pollution plays a large role in increasing asthma symptoms, especially among children. Without getting too technical, essentially the study explains that there are particles in the air we breathe, including indoors. Aside from the standard mixture of oxygen, carbon dioxide and other gases, air contains these solid and liquid particles, which are essentially pollutants. Common household tasks like dusting and cooking can generate more of these particles.

When these particles get into the respiratory system, they can irritate the lungs, which triggers asthma symptoms. Since children spend about 80% of their time indoors, this is a very big deal.

To help this problem, there are ways to control and improve the quality of air in your home. One simple way to do this is to have a York air filtration system with filters with high minimum efficiency reporting value (MERV) ratings in your York heating and cooling system. MERV ratings describe how well filters catch particles of certain sizes and keeping them out of the air—and your lungs.

The particles identified in the Hopkins study were as small as 2.5 microns, which would require a filter with a MERV rating of about 12 to catch. Higher MERV ratings mean more efficient filtration, but they need to be replaced more often. If you or child has asthma, it’s worth it.

For severe asthma or allergies, consider even higher-rated filters, like HEPA filters, which sport a MERV of 17 or higher. These will catch nearly all allergens, irritants and other particles that can make you sick.

Tags: , , , , , ,
Posted in Indoor Air Quality | Comments Off

What is a Matched HVAC System? A Question From Paterson

Friday, September 30th, 2011

It has been about 200 years since the arrival of interchangeable parts during the Industrial Revolution. Today in Paterson, we laud being able to take a malfunctioning part from a car, computer or vacuum cleaner, replace it with a newly minted part from any number of manufacturers, then keep right on plugging along.

Although this is a blessing in most arenas, when it comes to an HVAC system, it is not necessarily a good practice. Heating and cooling systems work best when they are matched – but what does that mean? And why does it matter?

Why Matched Parts Matter in HVAC Systems

When referring to HVAC systems, a matched system is one in which various components are designed to work together. For example, an air conditioner and furnace made by the same manufacturer (such as York) can be matched, as can a furnace and a heat pump.

Typically, the matching is done in such a way that the “outdoor” components, such as air conditioners and heat pumps are designed to work best with their “indoor” partners, like air handlers and furnaces. There are also matched systems in which every component is matched to every other.

Efficiency Boosts

While this may seem to make maintenance and repairs a pain, the practice provides a big boost to the efficiency of the system. Because the components were designed and manufactured by the same team to work in harmony, the system performs optimally. Although you can often replace one component of a York matched system with one from another manufacturer and have it work fine, the system can lose efficiency, often to a significant and noticeable extent.

For these reasons, it is best to make use of matched York systems in your home whenever possible. This means choosing a new matched system to install, replacing broken parts with ones that match the rest of the system and even replacing older systems with newer ones to properly match, when necessary.

It may seem like a hassle at first, but it saves money in the long run by adding increased efficiency over unmatched systems.

Tags: , , , , , ,
Posted in Air Conditioning, Heating | Comments Off