Posts Tagged ‘Newark’

New Technology: Improve Energy Efficiency and Make Your Newark Home More Comfortable

Wednesday, March 7th, 2012

York has several innovative products that can make your Newark home more comfortable and help you save energy. Zone control systems help you keep each section of your house the correct temperature, and they also help you use less energy because some parts of your house need less heating than others. York also offers variable speed fans, which instead of turning on and off, run constantly to give you more even heating and better indoor air quality. Our multi-stage heating systems vary their output according to demand, so your home will maintain a comfortable temperature without wasting fuel. For more information about York’s energy saving products, take a look at this video:

 

Tags: , , , , , , , ,
Posted in Energy Savings, Heating, Indoor Air Quality | Comments Off

Perth Amboy Heating Tip: Most Energy Efficient Upgrades for Your Home

Friday, February 3rd, 2012

Before you decide which upgrades will make your Perth Amboy home more efficient, it would be best to get a home energy audit. You can do this yourself with a few simple tests, or you can hire a professional auditor. The auditor will use advanced equipment and techniques, such as blower doors and infrared cameras, to detect air leaks and places that need more insulation.

When your home is properly insulated and sealed, here are some upgrades you’ll want to think about to make your home more efficient.

High-Efficiency Furnaces & Heat Pumps

If you have an old single-stage York furnace, it is time to upgrade. These furnaces were designed to run on two settings—either off or on, and when they are on, they run at full speed. Not only do they lose heat this way, but they also take longer to warm up your home. The new two-speed and multispeed models run at lower speeds to maintain a constant temperature. You can also buy ones with variable-speed blowers that operate on various speeds, which are the most efficient. York heat pumps are a good option if you need both heat and A/C in your home. While most heat pumps are manufactured to be efficient by design, the newer models are the most efficient way to heat and cool your home. If you have a heat pump older than 15 years, talk to an HVAC technician about a heat pump replacement.

Solar & Tankless Water Heaters

When you’ve upgraded your heating system, it may be time to install a more efficient water heater. Solar water heaters are gaining popularity, and they are the most efficient way to save hot water if certain factors are in place, such as sunlight exposure and high fuel costs.  Tankless water heaters heat your water with individual units located near hot water applications. You also have the option of installing a single, whole-home tankless water heater, or for appliances that use more hot water, such as dishwashers and washing machines, you can install tankless models just for their use.

Water-Saving Toilets & Low-flow Plumbing Fixtures

Duel flush, or water-saving toilets are an excellent choice for an upgrade if you want to save water. These toilets use less water overall, and you have the option of using more or less water each time you flush. Installing low flow faucets and fixtures can also provide up to 60% in utility savings. Low flow plumbing fixtures reduce the flow rate for each fixture or application, which reduces the overall amount water used in the home. These are a good option if you’ve installed a tankless water heating system. Your tankless water heaters will be more efficient if the sum of the flow rate total for every fixture in the home is lower.

Don’t hesitate to call a local New Jersey York dealer if you have any questions about upgrading your Perth Amboy home.

Tags: , , , , , ,
Posted in Heating | Comments Off

A Question from Newark: How to Clean the Parts of a Heat Pump?

Monday, December 19th, 2011

It is very important to keep your York heat pump clean. It improves efficiency, helps performance and prevents malfunctions. Cleaning your heat pump should be part of your Newark home maintenance routine in order to keep the house as comfortable and worry-free as possible.

That is all well and good, but how do you go about cleaning the components of your York heat pump? It’s one thing to advise you to clean, clean, clean…but it doesn’t do much good if you do not know how. To correct that, here are some tips to help you clean the different parts of your heat pump.

Caution: before doing any maintenance on your York heat pump, including cleaning, be sure to turn off the power to the unit. This is a necessary safety measure.

Filters

  • If you use disposal air filters in your heat pump, skip this part. Just make sure to change them regularly, in accordance with the manufacturer’s instructions.
  • To clean air filters, follow the directions of the manufacturer that were included with the filter. This is also a good time to double check that the filters are installed properly.
  • Clean or replace your filters monthly during heavy use seasons, such as the warm summer months and cold months of late fall and winter.

Coils

  • Remove any debris from the outside of the coils and the surrounding area. Sticks and leaves may have accumulated near the outdoor coils, so just brush them away.
  • Using a soft brush attachment, vacuum the exterior of the coils. Take care not to bend or dent the coils.
  • Using a hose with a spray attachment, flush the coils with water from the inside out. This will remove any stubborn debris. Take care not to spray any electrical components, such as the fan or any nearby wires.
  • While you are inside the unit, vacuum the bottom inside to get rid of any more stray debris.

With that done, put everything back, replace the grille covers and power the heat pump back on. It should run smoothly with a fresh filter and no debris to gum up the works. Clean the coils every few months to keep the heat pump in tip top shape. And if you have any questions about maintenance, talk your local New Jersey York Dealer.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Whole House Air Quality System. What Is It? When and Why Do You Need It? A Question from Jackson

Friday, November 18th, 2011

There are many ways to control the indoor air quality of your Jackson home. The easiest way to is to clean your vents and ducts. This reduces the number of pollutants like mold and dust that get into your air each day. In some cases, however, you may need something more powerful and that’s where a whole house York air quality system comes in.

What Does Whole House Air Quality Provide?

There are many filters and purifiers on the market that can be operated in a single room such as your living room or the bedroom of your child. However, if you have a more substantial contaminant problem, a York whole house system actually attaches to the source of fresh air.

Most whole house systems integrate directly into the ventilation ducts and fans of your house. This ensures the air is purified and cleaned as it enters your home, not after it has circulated for some time. Air cleaners are also integrated into ducts where UV lighting can remove bacteria, viruses, smoke and exhaust fumes that come in from outside.

Your York furnace and air conditioner will also be filtered above and beyond standard manufacturer filtering, ensuring there are less contaminants traveling through your ducts to start with.

When Do You Need It?

The upgrade to a whole house system isn’t just for those suffering from dust, pollen and pet dander. These can easily be removed with regular cleaning of your ducts and a HEPA filter in each room affected. However, if your home tests high for various gases, exhaust fumes, or molds that are beyond your control, a whole house system is a great way to protect yourself.

In particular, these systems are useful when the contaminants come in from outside. Most indoor contaminants can be removed with careful maintenance of your comfort system, but if your neighbor has a leaky exhaust pipe or if you live near a busy highway, you can’t do much about it other than to filter the air as it comes inside.

Choosing a York whole home air quality system starts with knowing what you need to filter. So, proper air testing is highly recommended. After testing, make sure your current systems will integrate well with the new air quality controls. If everything works properly, you’ll be well on your way to fresh, clean air in no time.

Tags: , , , , , ,
Posted in Indoor Air Quality | Comments Off

Maintenance: Cleaning Your Conditioner Coil Will Save You Headaches Later in Newark

Friday, September 16th, 2011

You have plenty of things to clean all over your Newark house. But do you really have to clean your York air conditioner too? Well, if you want it to keep working well, you do. In fact, cleaning the coil of your air conditioner is a quick and easy process, especially if you do it on a regular basis, and it can save you a great deal of frustration later on.

Like any machine, your air conditioner needs a tune up from time to time in order to continue to function properly. While a lot of this is taken care of if you have an annual maintenance service performed by a professional, your air conditioning coil will benefit greatly by being cleaned more often than that.

In fact, during your annual maintenance visit, your air conditioning technician can easily demonstrate for you how to get to the coil and clean it. This is a relatively easy task that you can carry out every month or so when your system is in use to help ensure optimal health and functioning for your system.

Of course, your York air conditioning system will still run whether you clean the coils on a regular basis or not. For now, that is. Allowing more and more debris to build up on the coil, however, can have a big impact on the overall energy efficiency of your unit. An air conditioner with a dirty coil will have to work harder to keep your house cool, and that will be reflected by an increase in energy consumption.

Also, an air conditioner with a dirty coil that is having to work harder to keep your house cool will wear out more quickly than one that is working properly without added impediments. The added wear and tear that this causes to various other parts within your air conditioner can cause them to malfunction and need to be replaced sooner than they should.

This means more costly repairs, even if they are minor ones. It also means that your entire York air conditioning system will probably not last as long as it may have with proper care. You will have to replace it sooner, adding even more to the cost of having and running the equipment.

Cleaning your air conditioner coil regularly is a simple and effective way of helping to keep the entire system running smoothly and efficiently for many years to come.

Tags: , , , ,
Posted in Air Conditioning | Comments Off