Posts Tagged ‘Passaic’

York and the Good Housekeeping Seal

Wednesday, February 29th, 2012

Many York products bear the Good Housekeeping Seal, but what exactly does that mean? Good Housekeeping is a magazine that is dedicated to helping its readers find only the best food and other products on the market. For over a hundred years, Good Housekeeping has tested the advertisements and products in its magazine to ensure that they live up to their promises. When a product has earned the Good Housekeeping Seal of approval, it means that it has been tested and proven its quality. Good Housekeeping is so sure of its Seal that it offers its own guarantee: “If any product that bears our Seal or is advertised in this issue proves to be defective within two years from the date it was first sold to a consumer by an authorized retailer, we, Good Housekeeping, will replace or repair the product or refund the purchase price.”

Many York products have earned the Good Housekeeping seal, and are sold with the same excellent guarantee. As long as you buy your product from an authorized York dealer,  Good Housekeeping and York stand behind all the assurances that come with the York equipment.

For more information about York products and the Good Housekeeping seal, contact your local New Jersey York Dealer.

Jersey City Heating Repair Guide: Is Your Furnace Not Blowing Enough Air?

Monday, January 30th, 2012

Have you ever been in your Jersey City house in the winter, listening to your York furnace churn away trying to heat the house, but noticed that the whole place is still cold? If you checked the heating vents in this situation, you would probably find that there is not much air flow coming out of them, which is why you are still freezing.

It is entirely possible for the furnace to be burning away, producing hot air, without enough of that warm air ever actually being distributed through your home. So it continues to run and run, resulting in excess wear and tear on  your York heating system that will probably shorten its productive life, as well as keeping your whole home too chilly.

Why does that happen? There are a several common culprits for insufficient air flow from a furnace. Below is a list of the most frequent offenders, along with solutions for each:

  • Cause: Dirty or broken air filter. An air filter that has accumulated too much build up or is damaged will slow down air flow in a hurry.
    Solution: Clean or replace the air filter as necessary. This should be part of routine furnace maintenance in order to ensure efficient operation. Refer to the manufacturer’s recommendations to see how often you should check your air filter(s).
  • Cause: Damaged, corroded, broken or collapsed ductwork. Your ducts are like the road that warm air travels on. If the road is out, then no one can get through. Simple as that.
    Solution: Have a professional inspect and repair your ductwork. A routine ductwork check is also part of a professional’s annual maintenance inspection.
  • Cause: Blower fan not blowing enough. This can be caused by a loose fan belt, or a dirty motor.
    Solution: First, clean the blower fan and the area around it. It has to deal with a lot of air, so it naturally becomes dirty over time. If that doesn’t fix it, the fan belt probably needs to be replaced.

There are some other causes of improper furnace air flow, but those are the most common and easiest to detect and repair. If your heat registers are not returning any warm air at all, that is likely a different problem and you should call a New Jersey York dealer to look at the system right away.

Rockaway York Dealer Tip: Causes of Delayed Furnace Ignition

Monday, December 26th, 2011

Delayed ignition is usually accompanied by a loud banging or booming sound that resembles a small explosion in your gas appliance. In your Rockaway home’s York furnace, this can be terrifying and should never be ignored.

What Causes Delayed Ignition

Delayed ignition usually happens when you first turn on your furnace, often after a long delay between use, so usually early in the fall or late in the spring when you don’t necessarily have it on every day of the week.

What happens is moisture builds up over the course of a period of inactivity and begins to corrode the firebox in your furnace. That corrosion builds up to the point that it starts to block the ports that feed gas into the burners. When these ports get blocked, the burners down the line cannot light and when you flip the switch, they won’t light immediately.

Of course, while rust and corrosion are a risk, lint and dust can be equally problematic (and are more common if you don’t have your furnace cleaned properly each fall). Sulfur build up is also a possibility, as it is left behind by burning natural gas. It will appear as a layer of white on the surface of the burners or the pilot light.

When all of this happens and the ports are not cleaned properly, gas will build up in the chamber after it is turned on and, when it finally ignites, create the small boom sound. It doesn’t just sound like an explosion – it is one – and if ignored, it can become incredibly dangerous.

Solving the Problem

Delayed furnace ignition is an easy problem to avoid. All you need to do is have your York furnace cleaned properly before turning it on each fall. A technician will clean the burners and ports and remove any dust, lint, rust or sulfur buildup that might block ignition and cause a delay.

When replacing your York furnace, look for a device with corrosion resistant materials. You can learn more about these when it comes time to replace your furnace from a technician. Most importantly, be careful. It may be a small problem now, but if left to build up over time, that small boom can become a much larger one. If you have any questions about delayed furnace ignition, talk to your New Jersey York Dealer.

When to Replace Your Air Conditioning System: A Guide From Montgomery

Friday, September 9th, 2011

One of the last things you probably want to think about is replacing your current York air conditioning system, as we know in Montgomery. However, the time will come when you can no longer ignore the fact that your air conditioning system is not getting the job done like it used to. And considering your replacement options early can help save you a lot of money and aggravation in the long run.

Before you can start looking at replacement options, though, you need to be aware that the time has come to replace your current York model. But how can you tell that your air conditioner is on its way out? Well, there are actually quite a few warning signs that, if you are attuned to them, will help you determine whether or not it is the right time to replace.

First of all, if you have to call for repairs, even minor ones, on a regular basis, chances are that you would be better off replacing rather than continuing to patch up the air conditioning system you already have. This is true for several reasons including the fact that a system that requires repairs so often is probably not going to last you much longer anyway.

By replacing now rather than continuing to pay for repairs, you will save a lot of money in the long run. After all, you are going have to pay for the new system sooner or later, so you might as well skip the shelling out of extra cash to repair a system you are just going to get rid of anyway.

Problems like inadequate or uneven cooling or mismanaged humidity levels in your home are a good sign that something is not working right in your air conditioning system and that it may be time to replace. At the very least, you should call someone out to take a look and let you know what type of repairs you are looking at.

You should also think about replacing an older system even if it is still working fine because the newer systems available (like the Affinity Series CZH 18 SEER Air Conditioner) are much more energy efficient than even the top of the line models available ten years ago. While you will have to pay the purchase and installation cost up front, you will immediately begin to save substantial amounts on your monthly cooling bills.