Posts Tagged ‘Paterson’

Heat Pump Tips from Hopatcong: Backup Heaters

Friday, January 20th, 2012

A backup heating system is sometimes necessary for Hopatcong homeowners who heat their homes with a York air-source heat pump. This style of heat pump transfers the heat from the outside air to your home in the winter, and it pushes the warm air outside the home in the summer. Although some systems are efficient enough to work in colder climates, most heat pump systems require a backup heater when temperatures drop below 20° F.

Furnaces are commonly used as a backup heater for air-source heat pumps, especially since the furnace fan blower can help distribute the hot air throughout the home. Although they are more expensive to buy and install, geothermal heat pumps typically do not require a backup heating system. These are also called ground-source or water-source heat pumps since they draw in heat from the ground below the house or from a nearby water source. Because they take advantage of the ground or water temperatures, they are also easier to maintain and have lower operating costs.

Absorption heat pumps use a heat source, such as natural gas or solar-heated water, instead of electricity. Natural gas is typically used for absorption heat pumps, so they are also called gas-fired heat pumps. Depending on the source of the heat, you may or may not need a backup heating system. It’s always best to speak to a local York dealer if you are not sure when it’s necessary for a backup heating system.

Call a York dealer today if you have any questions about a backup heater for your Hopatcong home.

A Question from Newark: How to Clean the Parts of a Heat Pump?

Monday, December 19th, 2011

It is very important to keep your York heat pump clean. It improves efficiency, helps performance and prevents malfunctions. Cleaning your heat pump should be part of your Newark home maintenance routine in order to keep the house as comfortable and worry-free as possible.

That is all well and good, but how do you go about cleaning the components of your York heat pump? It’s one thing to advise you to clean, clean, clean…but it doesn’t do much good if you do not know how. To correct that, here are some tips to help you clean the different parts of your heat pump.

Caution: before doing any maintenance on your York heat pump, including cleaning, be sure to turn off the power to the unit. This is a necessary safety measure.

Filters

  • If you use disposal air filters in your heat pump, skip this part. Just make sure to change them regularly, in accordance with the manufacturer’s instructions.
  • To clean air filters, follow the directions of the manufacturer that were included with the filter. This is also a good time to double check that the filters are installed properly.
  • Clean or replace your filters monthly during heavy use seasons, such as the warm summer months and cold months of late fall and winter.

Coils

  • Remove any debris from the outside of the coils and the surrounding area. Sticks and leaves may have accumulated near the outdoor coils, so just brush them away.
  • Using a soft brush attachment, vacuum the exterior of the coils. Take care not to bend or dent the coils.
  • Using a hose with a spray attachment, flush the coils with water from the inside out. This will remove any stubborn debris. Take care not to spray any electrical components, such as the fan or any nearby wires.
  • While you are inside the unit, vacuum the bottom inside to get rid of any more stray debris.

With that done, put everything back, replace the grille covers and power the heat pump back on. It should run smoothly with a fresh filter and no debris to gum up the works. Clean the coils every few months to keep the heat pump in tip top shape. And if you have any questions about maintenance, talk your local New Jersey York Dealer.

Staying Safe with Clean Indoor Air in Carteret

Friday, December 16th, 2011

Millions of homeowners are living in polluted air and don’t even know it, some of them even in Carteret. In fact, the quality of air inside homes is a significant factor influencing the health and wellbeing of millions annually. The World Health Organization estimates that 1.6 million people die every year as a result of poor indoor air quality. That makes it the 8th most common risk factor for death in the world and a huge contributor to cancers and other respiratory health problems.

So why is indoor air quality such an issue? Consider for a moment what a home does. At its core, a home is designed to keep you and your family protected from outside threats. It does that with solid walls, tightly sealed windows and a well-built roof over your heads. But the same technology that has made homes better sealed than ever also contributes to safety and health problems for residents of those homes by trapping air pollutants inside.

What’s at Stake?

The most common indoor air pollutants are mere irritants. Things like pollen, dust and dander are uncomfortable but don’t necessarily make anyone deathly ill. However, when a home is sealed up too tightly and the air isn’t filtered and cleaned regularly, the result can be downright dangerous to the occupants. Those seemingly innocuous pollutants suddenly make up a much larger percentage of the air inside.

In some cases, according to the WHO, the amount of smoke and other particles inside the home can be up to 100 times higher than what is considered safe outside. Now consider the other pollutants that can be inside the house. If pollen and dander cannot get out, what about exhaust from your stove, radon gas in your basement or mold spores in your ductwork.

You’re breathing all of it and the result is a significant increase in health risks for diseases like pneumonia, respiratory disease, and asthma – all of which are highly dangerous to anyone, but especially children and the elderly.

Solutions Abound

Luckily, this is not a problem you must deal with indefinitely. Modern York HVAC systems integrate advanced ventilation technology, air filtration and air cleaning systems to remove the vast majority of these pollutants. But, first, you need to have them installed. Proper testing can help you determine what aspects of your home’s air supply need to be fixed first and foremost. From there it’s just a matter of finding the right contractor.

Troubleshooting Thermostat Issues: A Guide from Hopatcong

Monday, November 21st, 2011

If your room temperature is too hot or cold, what is the first thing you check? Probably the thermostat. If you are a Hopatcong homeowner, you probably have played around with the setting on your York thermostat, much to the chagrin of other occupants who don’t share your same comfort level. And if you try and adjust a thermostat at work – well forget about it. Most companies now have locking thermostats or “false” ones that don’t actually connect to the heating and cooling system.

So if you have a temperature problem, is it really your York thermostat that causes it? Maybe yes and maybe no. One physical characteristic to check is the location of the thermostat. If it is in a drafty hallway or near a heat source, it only reads the temperature for that area and other parts of the building are neglected. You will often find more than one thermostat in a home that is tied into more than one furnace or air conditioner.

The older more popular round thermostats are manually controlled and do not adjust to any conditions in the home. They simply control the heating and cooling functions based on a human turning a dial. It’s as simple as that. So if you use this method to adjust the temperatures, blame yourself and not the thermostat. You might want to consider installing a digital, programmable thermostat.

With that in mind, let’s look at some typical ways to troubleshoot your York thermostat.

  • Check the anticipator, which is a small metal tab on the front of the printed scale. Give it a light push in either direction. It may be stuck.
  • Clean the interior of the thermostat housing and clean the contacts (small metal plates)
  • Check loose wires or wires that may be corroded.
  • Read the thermostat manual (if not available, look online) for other tips such as ensuring there is voltage to the terminals.

If you have checked everything and the thermostat seems to be in working order, look for other things within the heating & cooling system. These include blocked or restricted registers and vents, leaks or cracks in ductwork, and dirty air handling filters.

How Much Will a High Efficiency Furnace Save Me? A Question from Paramus

Monday, October 17th, 2011

The York furnaces you can buy these days in Paramus are all much more energy efficient than those available even 10 years ago. However, that doesn’t mean that all of the current models are created equal. There is still a pretty big variation when it comes to energy efficiency and when it comes to price, so you need to really know what you’re looking for if you want to get the best deal out there.

The first thing you should understand when you’re trying to pick out a York furnace is how energy efficiency for this type of equipment it measured. All furnaces come with an annual fuel utilization efficiency (AFUE) rating that reflects just exactly how energy efficient they are.

Any furnace you buy today will have an AFUE of at least 80%, but it’s possible to purchase models with AFUEs of 97% or more. Of course, energy efficiency is generally a good thing, but there are some other things to consider when you’re trying to decide just how energy efficient you need your new furnace to be.

What this calculation really comes down to is how much you’ll be able to save monthly and annually with a higher efficiency furnace. While your heating bills will certainly be lower the higher the furnace’s efficiency is, you will also pay more up front for the highest efficiency models.

This higher purchase price may be worth it, however, if you live in an area with particularly harsh winters. If your heating load is very high and you’ll be using your York furnace a lot, your monthly savings will make up for the higher initial price of the high efficiency furnace in a reasonable amount of time.

Keep in mind that a furnace with an 80% AFUE is still quite efficient and will almost certainly save you a considerable amount monthly when compared to the unit you’re currently using. For more information for what is right for your home, contact your local New Jersey York Dealer.

What is a Matched HVAC System? A Question From Paterson

Friday, September 30th, 2011

It has been about 200 years since the arrival of interchangeable parts during the Industrial Revolution. Today in Paterson, we laud being able to take a malfunctioning part from a car, computer or vacuum cleaner, replace it with a newly minted part from any number of manufacturers, then keep right on plugging along.

Although this is a blessing in most arenas, when it comes to an HVAC system, it is not necessarily a good practice. Heating and cooling systems work best when they are matched – but what does that mean? And why does it matter?

Why Matched Parts Matter in HVAC Systems

When referring to HVAC systems, a matched system is one in which various components are designed to work together. For example, an air conditioner and furnace made by the same manufacturer (such as York) can be matched, as can a furnace and a heat pump.

Typically, the matching is done in such a way that the “outdoor” components, such as air conditioners and heat pumps are designed to work best with their “indoor” partners, like air handlers and furnaces. There are also matched systems in which every component is matched to every other.

Efficiency Boosts

While this may seem to make maintenance and repairs a pain, the practice provides a big boost to the efficiency of the system. Because the components were designed and manufactured by the same team to work in harmony, the system performs optimally. Although you can often replace one component of a York matched system with one from another manufacturer and have it work fine, the system can lose efficiency, often to a significant and noticeable extent.

For these reasons, it is best to make use of matched York systems in your home whenever possible. This means choosing a new matched system to install, replacing broken parts with ones that match the rest of the system and even replacing older systems with newer ones to properly match, when necessary.

It may seem like a hassle at first, but it saves money in the long run by adding increased efficiency over unmatched systems.

Taxes and Energy Savings in New Jersey

Monday, September 5th, 2011

Being energy efficient isn’t just good for the environment; it is good for your wallet too! Not only do you save money by lowering your energy bills each month but you are also able to get some tax credits. While some of these credits have changed since 2010, there are still plenty of ways that you can save money by improving the energy efficiency of your New Jersey home.  Taxes are confusing, but this is one tax credit that is easy to understand without your accountant. We found this great guide on Bizactions.com that explains exactly what you can do to improve your home and claim these tax credits.

The federal government offers two different tax credits for energy-saving home improvements. The rules for one credit changed for the worse since last year. The other credit remains as generous as ever. Here’s what you need to know if you want to claim these credits this year.

1. Modest Credit
for Garden Variety
Energy-Saving Improvements
2. Bigger Credit
for More Expensive
Energy-Saving Equipment
The first credit equals 10 percent of certain qualified home improvement expenditures plus 100 percent of certain other expenditures–subject to a rather stingy overall credit cap of $500. And you must reduce that already-skimpy cap by credits claimed in earlier years. While the $500 cap is uninspiring, the good news is the credit covers a broad range of energy-saving expenditures for your principal U.S. residence, and there are no income limits. However improvements made to vacation homes and foreign residences are not eligible.

You may remember that the 2010 version of this credit was much more generous. It equaled 30 percent of qualified expenditures — subject to a $1,500 cap. The current version with the $500 cap is scheduled to expire at year end. Because it is doubtful that the credit will be extended, you may need to take action this year to benefit.

Here are more details on the $500 credit.

Claiming the Credit for Improvement Costs

For the following home improvements, the maximum credit equals 10 percent of qualified 2011 expenditures up to the $500 limit (reduced by any credit claimed in earlier years).

  • Exterior windows including skylights and storm windows, subject to a $200 credit cap.
  • Exterior doors including storm doors.
  • Insulation.
  • Metal and asphalt roofs with heat-reduction components.

For these items, you cannot count costs for site preparation, assembly, or installation.

Claiming the Credit for Equipment Costs

For the following items, the maximum credit equals 100 percent of qualified 2011 expenditures up to the $500 limit (reduced by any credit claimed in earlier years).

  • High-efficiency central air conditioners; electric heat pumps, electric heat pump water heaters; water heaters that run on natural gas, propane or oil; and biomass fuel stoves used for heating or hot water. The cap for these items is $300.
  • Furnaces and hot water boilers that run on natural gas, propane, or oil–subject to a cap of $150.
  • Advanced main air circulating fans used in natural gas, propane, and oil furnaces–subject to a cap of $50.

For these items, costs for site preparation, assembly, and installation are eligible for the credit.

Manufacturer’s Certification Is Required

You must obtain a manufacturer’s certification that the product in question qualifies for the $500 credit. The certification may be on the product packaging, or you may be able to print it out from the manufacturer’s website. In any case, keep the certification with your tax records. You won’t need to attach the certification to your Form 1040, but Form 5695 (Residential Energy Credits) will be included with your return.

The second credit equals 30 percent of qualified expenditures to buy and install more-exotic (and expensive) energy-saving equipment for your home. Because the expenditures for these items can be big, the credit amounts can be big too. And there are no income limits. Even billionaires can take advantage.

This second credit is available through 2016, so there is no big hurry. If your 2011 credit is so large that you cannot use it all up on this year’s return, you can carry the excess forward to 2012 and beyond.

Qualified Expenditures

The credit equals 30 percent of qualified expenditures including costs for site preparation, assembly, installation, piping, and wiring for the following gear.

  • Solar water heating equipment for your U.S. residence (including a vacation home).
  • Solar electricity generating equipment for your U.S. residence (including a vacation home).
  • Wind energy equipment for your U.S. residence (including a vacation home).
  • Geothermal heat pump equipment for your U.S. residence (including a vacation home).
  • Fuel cell electricity generating equipment for your U.S. principal residence. Vacation homes don’t count here. For this part of the credit, the maximum annual credit amount is limited to $500 for each .5 kilowatt hour of fuel cell capacity that you add during that year.

Special Rules

You cannot claim the credit for equipment used to heat a swimming pool or hot tub, and special rules apply to expenditures for residential co-op and condominium buildings.

You Must Get a Manufacturer’s Certification

Again, you are required to obtain a manufacturer’s certification stating that the equipment in question qualifies for the credit. You don’t need to attach it to your Form 1040, but keep it with your tax records. A completed Form 5695 will be included with your return.

Finally, keep proof of exactly much you spend — including any extra amounts for site preparation, assembly, installation, piping, or wiring.

Check for Additional Cash Inducements

You might also be eligible for state and local income tax benefits, subsidized state and local financing deals, and utility company rebates. These additional inducements can amount to hundreds of dollars or more.