Posts Tagged ‘Rahway’

Jersey City Heating Repair Guide: Is Your Furnace Not Blowing Enough Air?

Monday, January 30th, 2012

Have you ever been in your Jersey City house in the winter, listening to your York furnace churn away trying to heat the house, but noticed that the whole place is still cold? If you checked the heating vents in this situation, you would probably find that there is not much air flow coming out of them, which is why you are still freezing.

It is entirely possible for the furnace to be burning away, producing hot air, without enough of that warm air ever actually being distributed through your home. So it continues to run and run, resulting in excess wear and tear on  your York heating system that will probably shorten its productive life, as well as keeping your whole home too chilly.

Why does that happen? There are a several common culprits for insufficient air flow from a furnace. Below is a list of the most frequent offenders, along with solutions for each:

  • Cause: Dirty or broken air filter. An air filter that has accumulated too much build up or is damaged will slow down air flow in a hurry.
    Solution: Clean or replace the air filter as necessary. This should be part of routine furnace maintenance in order to ensure efficient operation. Refer to the manufacturer’s recommendations to see how often you should check your air filter(s).
  • Cause: Damaged, corroded, broken or collapsed ductwork. Your ducts are like the road that warm air travels on. If the road is out, then no one can get through. Simple as that.
    Solution: Have a professional inspect and repair your ductwork. A routine ductwork check is also part of a professional’s annual maintenance inspection.
  • Cause: Blower fan not blowing enough. This can be caused by a loose fan belt, or a dirty motor.
    Solution: First, clean the blower fan and the area around it. It has to deal with a lot of air, so it naturally becomes dirty over time. If that doesn’t fix it, the fan belt probably needs to be replaced.

There are some other causes of improper furnace air flow, but those are the most common and easiest to detect and repair. If your heat registers are not returning any warm air at all, that is likely a different problem and you should call a New Jersey York dealer to look at the system right away.

Tags: , , , , , ,
Posted in Heating | Comments Off

Troubleshooting Thermostat Issues: A Guide from Hopatcong

Monday, November 21st, 2011

If your room temperature is too hot or cold, what is the first thing you check? Probably the thermostat. If you are a Hopatcong homeowner, you probably have played around with the setting on your York thermostat, much to the chagrin of other occupants who don’t share your same comfort level. And if you try and adjust a thermostat at work – well forget about it. Most companies now have locking thermostats or “false” ones that don’t actually connect to the heating and cooling system.

So if you have a temperature problem, is it really your York thermostat that causes it? Maybe yes and maybe no. One physical characteristic to check is the location of the thermostat. If it is in a drafty hallway or near a heat source, it only reads the temperature for that area and other parts of the building are neglected. You will often find more than one thermostat in a home that is tied into more than one furnace or air conditioner.

The older more popular round thermostats are manually controlled and do not adjust to any conditions in the home. They simply control the heating and cooling functions based on a human turning a dial. It’s as simple as that. So if you use this method to adjust the temperatures, blame yourself and not the thermostat. You might want to consider installing a digital, programmable thermostat.

With that in mind, let’s look at some typical ways to troubleshoot your York thermostat.

  • Check the anticipator, which is a small metal tab on the front of the printed scale. Give it a light push in either direction. It may be stuck.
  • Clean the interior of the thermostat housing and clean the contacts (small metal plates)
  • Check loose wires or wires that may be corroded.
  • Read the thermostat manual (if not available, look online) for other tips such as ensuring there is voltage to the terminals.

If you have checked everything and the thermostat seems to be in working order, look for other things within the heating & cooling system. These include blocked or restricted registers and vents, leaks or cracks in ductwork, and dirty air handling filters.

Tags: , , , , ,
Posted in Heating | Comments Off

How Indoor Air Quality Controls Can Help People with Asthma: A Guide from Fair Lawn

Friday, November 4th, 2011

If you, your child or anyone else in your family suffers from asthma, you know that it can be brutal. The shortness of breath, the wheezing, and the chest tightness—it’s not just uncomfortable; it can be downright scary.

There is evidence to suggest that higher quality air can help keep asthma symptoms in check. While you can’t control air quality everywhere you go, you can be in charge of the quality of the air in your Fair Lawn home. Take a look at how controlling indoor air quality can help ease the suffering of asthma symptoms.

One study at Johns Hopkins found that indoor air pollution plays a large role in increasing asthma symptoms, especially among children. Without getting too technical, essentially the study explains that there are particles in the air we breathe, including indoors. Aside from the standard mixture of oxygen, carbon dioxide and other gases, air contains these solid and liquid particles, which are essentially pollutants. Common household tasks like dusting and cooking can generate more of these particles.

When these particles get into the respiratory system, they can irritate the lungs, which triggers asthma symptoms. Since children spend about 80% of their time indoors, this is a very big deal.

To help this problem, there are ways to control and improve the quality of air in your home. One simple way to do this is to have a York air filtration system with filters with high minimum efficiency reporting value (MERV) ratings in your York heating and cooling system. MERV ratings describe how well filters catch particles of certain sizes and keeping them out of the air—and your lungs.

The particles identified in the Hopkins study were as small as 2.5 microns, which would require a filter with a MERV rating of about 12 to catch. Higher MERV ratings mean more efficient filtration, but they need to be replaced more often. If you or child has asthma, it’s worth it.

For severe asthma or allergies, consider even higher-rated filters, like HEPA filters, which sport a MERV of 17 or higher. These will catch nearly all allergens, irritants and other particles that can make you sick.

Tags: , , , , , ,
Posted in Indoor Air Quality | Comments Off