Posts Tagged ‘Stafford’

A Question from West New York: What Makes a Furnace High Efficiency?

Friday, December 9th, 2011

In West New York, you’ve probably heard about the new lines of high efficiency furnaces being released by York, but what exactly is different about these high efficiency devices from your current York furnace? Let’s take a closer look at what a high efficiency furnace offers and why it can save you money.

Added Features

A high efficiency York furnace uses familiar technology in a new way to reduce the amount of energy lost when combustion takes place. This means:

  • Sealed Combustion – Instead of open combustion which allows heat to escape during and after the combustion process, a high efficiency furnace uses a sealed chamber with carefully measured and fed airflow to burn fuel and produce heat. Exhaust heat can then be recaptured and used to heat air transferred to your air vents.
  • Two Stage Gas Valves – With a two stage gas valve, your furnace can respond to the temperature outside. There isn’t just one “on” switch. The furnace will regulate gas flow based on how much energy is needed to produce heat for your home. So, if there is a sudden burst of cold outside, the furnace will respond accordingly, but for most days when heating needs are low, it will use only the minimum amount of needed gas.
  • Programmable – High efficiency furnaces are now programmable, meaning you can set specific time limits for operation, change thermostat settings digitally and inspect the device through an electronic read out. The level of control given to you by a programmable high efficiency furnace can greatly reduce gas or electricity consumption.

Cost Benefit

The real reason many people are interested in high efficiency York furnaces is that they are so much less expensive to operate. Instead of costing hundreds of dollars to run through the winter, they operate the bare minimum needed to heat your home. Using up to 95% of the fuel they consume to produce heat and regulating gas to cut how much is consumed during milder days, these furnaces are built to save you money. For more information about how to get one installed in your home, contact your local New Jersey York Dealer.

If you have an old furnace that chews through energy like nobody’s business, now might be the time to consider the benefits of a brand new, high efficiency model.

Product of the Week: Latitude Series TG9S Furnace

Wednesday, November 2nd, 2011

Our product this week is the Latitude Series TG9S Furnace. This furnace is streamlined to be easy to install in closets, attics or garages and measures only 33 inches in height.  The Latitude Series TG9S Furnace is very energy efficient; not only is it Energy Star rated but it also has a 95.5% AFUE rating. This means that it will save you money on your utility bills and still heat your home comfortably.

As well as being very easy to adjust with computerized controls to ensure efficient heating, this furnace is hybrid system compatible.  A hybrid system allows a homeowner to switch between two different heating technologies, such as a furnace or a heat pump, to provide the most efficient heating solution. Hybrid systems also have the advantage of fewer repairs, since each system is not running all the time, and more personalized comfort.

This furnace is a great and economical addition to any home. To have the Latitude Series TG9S Furnace installed in your house, contact your local New Jersey York Dealer.

Latitude Series TG9S Furnace

Components of a Heat Pump: Some Information from Bridgewater

Friday, October 28th, 2011

Because of their simply designed function – pumping heat one way or the other – York heat pumps have relatively few components. However, these components do not work the way you might expect, if you are picturing, for example, a fan that blows heat in or out.

A York heat pump operates on the same principle as an air conditioner or refrigerator, which may seem complicated at first, but it’s not. The heat pump consists of five main functional components, which are outlined below:

  1. The coils absorb heat from the surrounding air and channel it in or out of the home. There are two different types of coils in a heat pump. Condenser coils are outside the home transferring heat to and from the outside air. Evaporator coils are the reverse, transferring heat to and from the air inside the home.
  2. The coils are filled with a refrigerant, which is the medium that carries heat into or out of the home. On a cold day, for example, when the heat pump is in heating mode, the refrigerant in the condenser coils will absorb heat from the outside air, the flow inward into the evaporator coils, warming the interior of the house.
  3. The compressor pressurizes the refrigerant so that it is able to readily absorb as much heat from the air as possible. This is how your heat pump is able to gather warm air from the chilly outdoors to keep your home warm.
  4. The reversing valve is the component that changes the flow of the refrigerant when switching from heating mode to cooling mode, or vice versa.
  5. Finally, the air handler is the fan component that distributed the heat throughout the house via your home’s ductwork.

While these are the five main components, there are several smaller parts involved within and alongside each of these, as well. You need not concern yourself with them, since you won’t have occasion to interact with them. A York professional will be able to identify and repair any of the components of a heat pump as needed.

In addition to these five primary components, most heat pumps also include a heater pack, which is a bunch of actual heating elements for use when the heat pump cannot operate on its own. For example, you would turn on the “Emergency Heat” setting of your heat pump after a power outage to warm the refrigerant before use. That setting is supported by the heater pack.

How Much Will a High Efficiency Furnace Save Me? A Question from Paramus

Monday, October 17th, 2011

The York furnaces you can buy these days in Paramus are all much more energy efficient than those available even 10 years ago. However, that doesn’t mean that all of the current models are created equal. There is still a pretty big variation when it comes to energy efficiency and when it comes to price, so you need to really know what you’re looking for if you want to get the best deal out there.

The first thing you should understand when you’re trying to pick out a York furnace is how energy efficiency for this type of equipment it measured. All furnaces come with an annual fuel utilization efficiency (AFUE) rating that reflects just exactly how energy efficient they are.

Any furnace you buy today will have an AFUE of at least 80%, but it’s possible to purchase models with AFUEs of 97% or more. Of course, energy efficiency is generally a good thing, but there are some other things to consider when you’re trying to decide just how energy efficient you need your new furnace to be.

What this calculation really comes down to is how much you’ll be able to save monthly and annually with a higher efficiency furnace. While your heating bills will certainly be lower the higher the furnace’s efficiency is, you will also pay more up front for the highest efficiency models.

This higher purchase price may be worth it, however, if you live in an area with particularly harsh winters. If your heating load is very high and you’ll be using your York furnace a lot, your monthly savings will make up for the higher initial price of the high efficiency furnace in a reasonable amount of time.

Keep in mind that a furnace with an 80% AFUE is still quite efficient and will almost certainly save you a considerable amount monthly when compared to the unit you’re currently using. For more information for what is right for your home, contact your local New Jersey York Dealer.

What Is the Energy Star Label? A Question From Raritan

Monday, September 12th, 2011

Any time you go out and buy any type of appliance in Raritan, you probably notice that some have a distinct mark that signifies them as Energy Star appliances. That sounds like a good thing, of course, but what does it actually mean? Should you always buy an Energy Star model over another type?

The Energy Star label was originally developed to help consumers more easily recognize appliances that are more energy efficient than the average. In order to obtain an Energy Star seal of approval, any device must meet very strict guidelines when it comes to energy efficiency.

What that translates into for you as a consumer is a lower monthly energy bill when you buy Energy Star appliances. As long as the potential savings over time that you will get by using the Energy Star model as opposed to one that is not as energy efficient outweigh the difference in initial purchase price, it is worth it to spend a bit more on the Energy Star model.

Not all Energy Star appliances are created equal. You should still do your research and pick out the product that will both save you the most money and has the best chance of getting the job done right. We have several great York models that are Energy Star rated, check out the Affinity Series CZF 16 SEER Air Conditioner and the Latitude Series TCGF 14.5 SEER Air Conditioner.

Another benefit to Energy Star products is that, because they use less energy when they run, they also have a smaller impact on the environment than a model that uses a greater amount of energy to perform the same tasks.

Overall, it is definitely worth taking a closer look at all of the Energy Star options out there when you are purchasing an air conditioning system or any other type of appliance. Using less energy is always a good thing both for your bank account and for the planet.

Taxes and Energy Savings in New Jersey

Monday, September 5th, 2011

Being energy efficient isn’t just good for the environment; it is good for your wallet too! Not only do you save money by lowering your energy bills each month but you are also able to get some tax credits. While some of these credits have changed since 2010, there are still plenty of ways that you can save money by improving the energy efficiency of your New Jersey home.  Taxes are confusing, but this is one tax credit that is easy to understand without your accountant. We found this great guide on Bizactions.com that explains exactly what you can do to improve your home and claim these tax credits.

The federal government offers two different tax credits for energy-saving home improvements. The rules for one credit changed for the worse since last year. The other credit remains as generous as ever. Here’s what you need to know if you want to claim these credits this year.

1. Modest Credit
for Garden Variety
Energy-Saving Improvements
2. Bigger Credit
for More Expensive
Energy-Saving Equipment
The first credit equals 10 percent of certain qualified home improvement expenditures plus 100 percent of certain other expenditures–subject to a rather stingy overall credit cap of $500. And you must reduce that already-skimpy cap by credits claimed in earlier years. While the $500 cap is uninspiring, the good news is the credit covers a broad range of energy-saving expenditures for your principal U.S. residence, and there are no income limits. However improvements made to vacation homes and foreign residences are not eligible.

You may remember that the 2010 version of this credit was much more generous. It equaled 30 percent of qualified expenditures — subject to a $1,500 cap. The current version with the $500 cap is scheduled to expire at year end. Because it is doubtful that the credit will be extended, you may need to take action this year to benefit.

Here are more details on the $500 credit.

Claiming the Credit for Improvement Costs

For the following home improvements, the maximum credit equals 10 percent of qualified 2011 expenditures up to the $500 limit (reduced by any credit claimed in earlier years).

  • Exterior windows including skylights and storm windows, subject to a $200 credit cap.
  • Exterior doors including storm doors.
  • Insulation.
  • Metal and asphalt roofs with heat-reduction components.

For these items, you cannot count costs for site preparation, assembly, or installation.

Claiming the Credit for Equipment Costs

For the following items, the maximum credit equals 100 percent of qualified 2011 expenditures up to the $500 limit (reduced by any credit claimed in earlier years).

  • High-efficiency central air conditioners; electric heat pumps, electric heat pump water heaters; water heaters that run on natural gas, propane or oil; and biomass fuel stoves used for heating or hot water. The cap for these items is $300.
  • Furnaces and hot water boilers that run on natural gas, propane, or oil–subject to a cap of $150.
  • Advanced main air circulating fans used in natural gas, propane, and oil furnaces–subject to a cap of $50.

For these items, costs for site preparation, assembly, and installation are eligible for the credit.

Manufacturer’s Certification Is Required

You must obtain a manufacturer’s certification that the product in question qualifies for the $500 credit. The certification may be on the product packaging, or you may be able to print it out from the manufacturer’s website. In any case, keep the certification with your tax records. You won’t need to attach the certification to your Form 1040, but Form 5695 (Residential Energy Credits) will be included with your return.

The second credit equals 30 percent of qualified expenditures to buy and install more-exotic (and expensive) energy-saving equipment for your home. Because the expenditures for these items can be big, the credit amounts can be big too. And there are no income limits. Even billionaires can take advantage.

This second credit is available through 2016, so there is no big hurry. If your 2011 credit is so large that you cannot use it all up on this year’s return, you can carry the excess forward to 2012 and beyond.

Qualified Expenditures

The credit equals 30 percent of qualified expenditures including costs for site preparation, assembly, installation, piping, and wiring for the following gear.

  • Solar water heating equipment for your U.S. residence (including a vacation home).
  • Solar electricity generating equipment for your U.S. residence (including a vacation home).
  • Wind energy equipment for your U.S. residence (including a vacation home).
  • Geothermal heat pump equipment for your U.S. residence (including a vacation home).
  • Fuel cell electricity generating equipment for your U.S. principal residence. Vacation homes don’t count here. For this part of the credit, the maximum annual credit amount is limited to $500 for each .5 kilowatt hour of fuel cell capacity that you add during that year.

Special Rules

You cannot claim the credit for equipment used to heat a swimming pool or hot tub, and special rules apply to expenditures for residential co-op and condominium buildings.

You Must Get a Manufacturer’s Certification

Again, you are required to obtain a manufacturer’s certification stating that the equipment in question qualifies for the credit. You don’t need to attach it to your Form 1040, but keep it with your tax records. A completed Form 5695 will be included with your return.

Finally, keep proof of exactly much you spend — including any extra amounts for site preparation, assembly, installation, piping, or wiring.

Check for Additional Cash Inducements

You might also be eligible for state and local income tax benefits, subsidized state and local financing deals, and utility company rebates. These additional inducements can amount to hundreds of dollars or more.